收費島模具在生產制作產品的時候，使用的材料非常常見，就是我們生活中常使用的混凝土，混凝土的使用非常頻繁，混凝土的購買非常容易，一般各地都有出售的，所以我們在生產的時候，不管是預制生產還是現澆生產制作，在混凝土的購買上都不用擔心，一般都是可以就地取材的，我們在購買的時候，一定要對材料進行測試，只有生產之后的產品強度達到M7.5以上，才能夠算合格，否則就算生產出來產品，那么質量也是沒有保證的，一般非常容易損壞。我們都知道利用水泥制作出來的混凝土收費島模具產品一般都是灰色的，這樣在進行收費的地方就非常的不明顯，很容易發生碰撞，所以我們在生產出來的這種混凝土收費島模具產品之后，要對水泥產品進行拋光打磨，然后在上邊刷上黃黑條紋的熒光漆，兩種油漆的界線應該分明，不能有暈染，所以我們在刷漆的時候一定不能選擇潮濕的天氣或者冬天，這樣是會影響刷漆的效果的。
The materials used in the production of toll Island molds are very common, that is, the concrete often used in our life. The use of concrete is very frequent, and the purchase of concrete is very easy. Generally, it is sold everywhere. Therefore, we don't have to worry about the purchase of concrete, whether it is prefabricated production or cast-in-situ production, Generally, local materials can be obtained. When we buy, we must test the materials. Only when the product strength after production reaches M7.5 or above can it be considered qualified. Otherwise, even if the products are produced, the quality is not guaranteed, and it is generally very easy to be damaged. We all know that the concrete toll Island mold products made of cement are generally gray, so it is not obvious at the place of charging, and it is easy to collide. Therefore, after the concrete toll Island mold products are produced, we should polish the cement products, and then brush the fluorescent paint with yellow and black stripes on the top, The boundary between the two paints should be clear and there should be no halo, so we must not choose wet weather or winter when painting, which will affect the effect of painting.